Guide:ENBseries INI/Lens

From STEP Modding Wiki

[LENS]

This is for simulating lens distortion and reflection in cameras which is part of the bloom code; thus, it requires having bloom enabled in order to work. The amount of lens reflection is dependent on the amount of bloom.

ReflectionIntensity- sets the amount of lens reflection during the day, night, and in interiors.

ReflectionPower - controls how much of the effect is displayed depending on light levels during the day, night, and in interiors. Lower values cause the effect to be mirror-like and higher values will cause the effect to be glare-like.

These setting will adjust the amount of lens effects added, and will trigger when looking at a bright surface, like the sun. This section will not do anything if there is no Bloom added or if it is disabled.

The following parameters determine the intensity of the lens effects when looking at bright surfaces. The settings go from 0.0 to 10.0. If using an ENB Profile then it is recommended to not change these settings.

IgnoreWeatherSystem=false

Lens Reflection Intensity

ReflectionIntensitySunrise=1.0
ReflectionIntensityDay=1.0
ReflectionIntensitySunset=1.0
ReflectionIntensityNight=1.0
ReflectionIntensityInteriorDay=1.0
ReflectionIntensityInteriorNight=1.0
 Sky Layers

Lens Reflection Power

ReflectionPowerSunrise=2.0
ReflectionPowerDay=2.0
ReflectionPowerSunset=2.0
ReflectionPowerNight=2.0
ReflectionPowerInteriorDay=2.0
ReflectionPowerInteriorNight=2.0

Lens Dirt Intensity

DirtIntensitySunrise=1.0
DirtIntensityDay=1.0
DirtIntensitySunset=1.0
DirtIntensityNight=1.0
DirtIntensityInteriorDay=1.0
DirtIntensityInteriorNight=1.0

Lens Dirt Power

DirtPowerSunrise=2.0
DirtPowerDay=2.0
DirtPowerSunset=2.0
DirtPowerNight=2.0
DirtPowerInteriorDay=2.0
DirtPowerInteriorNight=2.0